Stainless steel tank foundation
The geometric size of the concrete foundation shall be formulated in accordance with the relevant provisions of GB02S101. Plane difference of concrete foundation <5mm.
Installation / construction / acceptance of stainless steel water tanks
Welding spot welding. Standard power supply on construction site. A maintenance space more than 500mm around the water tank. Appearance inspection no rust, no pollution: filled with water 2-3H, no obvious deformation of the box, no leakage of qualified welding.
Stainless steel water tank use / repair / maintenance
Piping, do not apply to the pipe inlet and outlet of the excessive load. Do not apply the weight of the valve and the large diameter pipe directly to the water outlet of the water tank, if necessary, set up the pipe support.
The stainless steel plate is welded by the stainless steel plate, and the stainless steel plate is welded integrally. The utility model has the advantages of simple structure and good strength. Because the box is made of stainless steel plate welded, completely blocked the sunlight, so do not breed algae. Keep the water clean.
Stainless steel tank test
Stainless steel water tank foundation can be used for concrete beam, I-beam or "C" type channel. The upper part of the stainless steel water tank is provided with a ventilating air filtration device on the top, and the specification and quantity are determined by the manufacturer according to the size of the inlet. Stainless steel water tanks are used inside the reinforcement. Each pipe flange is 1.0MPa standard flange. Designers in the layout of the water tank position, should refer to the GB17051-1997 two water supply facilities health standards. The technical specifications of the water tank specification or the position is not suitable for the actual use, and the design of the stainless steel water tank is determined according to the actual needs.
1, stainless steel tank full water experiment, 48 hours without leakage phenomenon;
2, pipe connections, valves and related accessories have no leakage phenomenon;
3, observe the water supply system operation is normal;
4, check the water disinfection system is working properly.